Orec Rabbit RM982F 4WD V-Twin Ride-On Brushcutter with Hydrostatic Drive | Pro Installation

Combining a 4WD transmission with a low centre-of-gravity, a wide-profile design and a differential lock, this high-end commercial-use ride-on brushcutter from Orec will take the most challenging terrain in its stride!

Positioned behind the driver’s seat is a hugely powerful 23hp Briggs & Stratton Vanguard engine; a V-Twin, OHV-type unit with an industrial pleated-paper type air-filter and a Dura-Bore cast-iron cylinder sleeve that bring piece-of-mind when it comes to long-term reliability.

A key starter and a Magnetron® electronic ignition combine to eliminate starting-problems; while B & S’s Oil Gard low-oil shutdown technology serves to reduce the chance of engine damage due to insufficient lubrication.

The Orec Rabbit RM982F 4WD Ride-On Brushcutter comes equipped with an expansive 98cm double-bladed cutting-deck that floats so as to ensure the blades follow every contour of the ground.

It boasts a three-stage adjustable steering-wheel, so operators of any stature and build can work in comfort; and it offers infinite-increment height-of-cut adjustment (50 – 110mm), which is controlled using a gas-spring-supported lever for convenience.

Thanks to its hand & foot-pedal-operated hydrostatic drive, which delivers infinitely-variable ground-speed control (forward and reverse), the Orec Rabbit RM982F is impressively manoeuvrable and excels at obstacle negotiation.

Also noteworthy on this premium, Japanese-engineered machine are the high-traction tyres, which ensure you won’t be defeated by adverse weather conditions; and the high-volume 14-litre fuel-tank, which works with the engine’s fuel-saving overhead-valve design to ensure top-up breaks will prove few and far between.